Loading
Knowledge BaseWorkflow App
Close
Search for help articles, community posts, ideas ...
End of Search Dialog

Workflow App

  • 27/10/2025
  • Knowledge

How To
Click to edit heading

The workflow builder allows firms to create new or update existing workflows for LEAP matter types.   

How to Enable Workflow App

 

To Enable the Workflow App:

  1. Navigate to the LEAP Menu

  2. Go to Marketplace 

  3. Search for the "Workflow" App and Click Enable .

 

Once enabled, you can access the Workflow App from the Other section in the LEAP Menu. 

How to Enable and Disable Workflows

 

To enable/disable a workflow:

  1. Click on LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

     
    Click to edit heading

    You need to have LEAP Admin privileges to access Workflow Builder tab.

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

    The Workflow Builder screen will open. 

  3. From the list of workflows click the three dots on the required workflow and select Enable.

  4. From the list of workflows click the three dots on the required workflow and select Disable.

 
Click to edit heading

Workflows that are Disabled are not available to be attached to matters.

When Enabling the Workflow App

 

If you're encountering issues enabling the Workflow app in LEAP Marketplace, please try performing a  LEAP Repair.

If the Workflow app is enabled in LEAP Marketplace but cannot be found in LEAP Matters, try disabling and re-enabling the app in LEAP Marketplace. If the issue persists, the LEAP admin should follow these steps:

  1. Go to LEAP Menu > Setting > Application setting 

    The LEAP Application Settings will open in a new window.

  2. Click Firm > under Staff > Members.

  3. Select the Staff name > Device Management from the menu on the left.

    This will bring up the Device Management page. You can see a list of all devices where that user has logged into LEAP Desktop.

  4. Click Sign Out & Clear all devices.

  5. Ask the user experiencing the issue to sign out of LEAP and sign back in to check if the issue persists.

How to Build a Workflow

 

To access the Workflow Builder:

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

    A list of existing workflows will be displayed. 

  3. Click the New Workflow button to create a new workflow.

  4. Click Select a matter type... to expand the matter type list.

    Select the Matter Type that you wish to create a workflow for.

    Create Workflow.png

  5. Enter a Workflow Description.

  6. Click Save & Open.

    The workflow canvas will open and show a Start and End component.

  7. Use your mouse to drag and drop Groups and Questions from the components panel on the left hand side.

  8. Double-click the added Group, to add the required work items.

  9. When the side panel opens, enter a Group Name.

  10. Click the appropriate icon for the type of work item that you wish to be included in the group.

    Work Item

    What the item does

    Precedent

    Create forms, precedents and emails in the matter

    Precedents

    Create multiple forms, precedents and emails in the matter

    Dates

    Create and update critical dates within the matter

    • For a Critical Date to appear as an anchoring point for a due date, there must be a Date-type Work Item in the Workflow for the
      Critical Date you wish to use as an anchor.

    Searches

    Order InfoTrack searches

    Appointments

    Create appointments in your Outlook calendar and in the matter

    Tasks

    Create tasks in your Outlook calendar and in the matter

    Notes

    Allow for notes to be actioned

    Accounting

    Allow for the inclusion of Office Payments, Trust Payments and Time Entries

    Matter Details

    Updates Matter Data screens

     
    Click to edit heading

    You can use drag and drop to reorder the work items as required.

  11. Once all the work items have been added, click Save.

  12. If the Start and End components are linked directly to each other, begin by clicking this link to highlight it and then press the delete key to remove the link.

    Doing so will make the Start and End components available for you to link to the other components you created.

  13. The next step is to link up the components in their sequence of events. Beginning with the Start component, hover over the edge of the component and, whilst holding the mouse down, drag the link to the desired component.

  14. To apply conditional logic to a workflow drag the Question component onto the canvas.

  15. Double-click the Question component to enter the question text.

  16. Set 'who the question will be assigned to' and the 'number of days' the question should be scheduled for following the previous work item.

     
    Click to edit heading

    Work Items can have their due dates tied to either the “Previous Work Item”, or to a Critical Date. For Critical Dates to be available as anchors for due dates, a Date-type Work Item needs to be added to the Workflow and linked to the relevant Critical Date. See the section on Critical Date > Due Date Linkage below for more details.

  17. The Question needs to be linked in order that there is a clear pathway to the relevant Group depending on the answer.

  18. Link the components by holding the mouse over a corner and draw a line to the required Group.

  19. This question needs to be set to 'Yes'.
    Use the slider as required.

  20. For the 'No' connect a line by holding the mouse over the right corner and draw a line to the required Group.

  21. Once you have completed all the Groups and Questions required, ensure that each component has a link from and to another.

     
    Click to edit heading

    There must always be link from Start to a component and from a component to End.

  22. Click Save and Back to be returned to the workflow list (The workflow will be validated to ensure all components are connected).

  23. With the workflow now created it needs to be Enabled before it can be attached to a matter.

  24. Click the three dots and select Enable.

     
    Click to edit heading

    Only workflows that are Enabled are available to be attached to matters.

Critical Date > Due Date Linkage

 

When starting a new Workflow, the only option is to link a new item to the "Previous Item" or to the "Instruction Date". The Instruction Date acts as the first Critical Date on the Calendar & Task tab for all LEAP Matters.

 
Click to edit heading

Adding a Date-type Work Items allows you to create a checklist item/prompt to yourself to fill out the corresponding Critical Date in the Matter itself.

Once a Date-type Work Item has been added to the Workflow, select a corresponding Critical Date. That Critical Date will then become available as an anchor for the due dates of other Work Items. See examples below:

  1. In the example below a Note Type - Work Item was created with description "Initial Fact Finding" and tied to the Instruction Date (+5).

  2. Add a Date Type - Work Item.
    Users will receive a prompt to fill out the “Summons Served Date” in the Matter, on the same due date as the prior Fact Finding item (+0).

  3. Now that the Date-based Work Item is tied to the “Summons Served Date”, the “Summons Served Date” is now an available anchor for subsequent due dates.

    In this example, a Note to “Draft Complaint,” was added and tied the Due Date to the Summons Served Date +5.

Adding Accounting

 

Office Payment - Trust Payment - Time Entry

  1. Double-click the Group that you wish to add the work items into.

  2. When the side panel opens, click on the Accounting icon.

  3. Use the drop-down to select the required accounting option.

  4. By default, the description is populated with the selected accounting option, revise the description as needed.

  5. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  6. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  7. Click Save.

     
    Click to edit heading

    If you are adding multiple work items, use drag and drop to re-order the work items as required.

Adding Appointments

 

  1. Double-click the Group that you wish to add the work items into.

  2. When the side panel opens, click on the Appointment icon.

  3. Enter a description for the appointment.

  4. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  5. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  6. Click Save.

     
    Click to edit heading

    If you are adding multiple items, use drag and drop to re-order the items.

Adding Dates

 

  1. Double-click the Group that you wish to add the work items into. 

  2. When the side panel opens click on the Date icon.

  3. Use the drop-down to select the required date to be included.

  4. Set who the work item is to be assigned to and the number of days it should be scheduled for following 
    the previous work item.

  5. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned

  6. Click Save.

     
    Click to edit heading

    If you are adding multiple items use drag and drop to re-order the items.

Adding Precedents/Emails/URLs

 

  1. Double-click the Group that you wish to add the work items into. 

  2. When the side panel opens, click on the +Precedent icon.

  3. Click the search icon to open the precedent picker.

  4. By default, the country setting will be that which has been set within the firm details.

    You can change this if required.

  5. Navigate through the matter type and folders to locate the required precedent/email/URL to be included.  

     
    Click to edit heading

    If you are unable to locate your firm’s custom precedents when adding them to the Workflow App, ensure the folders are nested under Practice Management > Miscellaneous.

  6. By default, the description field will be populated with the selected precedent's name. You can revise this if required.

  7. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  8. Set if the work item is to be Mandatory and Click Save

     
    Click to edit heading

    If a work item is set as Mandatory, it must be marked as Complete before any following work items can be actioned.

  9. Repeat these steps for as many items as needed.

    By default, when the folder list is displayed it will remember the last location that you navigated to.

  10. When returning to the side panel and reviewing the items that you have added, you can use drag and drop to re-order them as required.

Adding Matter Details

 

Give users the ability to open tables for data collection.

  1. Double-click the Group that you wish to add the work items into.

  2. When the side panel opens, click on the Matter Details icon.

  3. Use the drop-down to select the required data table.

  4. By default, the description is populated with the selected data table, revise the description as needed.

  5. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  6. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  7. Click Save.

     
    Click to edit heading

    If you are adding multiple work items, use drag and drop to re-order the work items as required.

Adding Multiple Precedents

 

  1. Double-click the Group that you wish to add the work items into.

  2. When the side panel opens, click on the +Precedents icon.

  3. Click the '+' sign to add the required documents.

    Enter a name for the multi-precedent item.

  4. By default, the country setting will be that which has been set within the firm details.

    This can be changed if required.

  5. Navigate through the matter type and folders to locate the required precedents. 

     
    Click to edit heading

    Only Word documents may be included as part of the precedent's item.

    By default, the description field will be populated with the selected precedent's name.  You can revise if required.

  6. Enter a name for the multi-document item.

  7. Repeat this process using the '+' sign for each precedent that needs to be included.

  8. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  9. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory, it must be marked as Complete before any following work items can be actioned.

  10. Click Save.

     
    Click to edit heading

    By default, when the folder list is displayed it will remember the last location that you navigated to.

  11. When returning to the side panel and reviewing the items that you have added, you can use drag and drop to re-order them as required.

Adding Notes

 

  1. Double-click the Group that you wish to add the work items to.

  2. When the side panel opens, click on the Note icon.

  3. Enter a Description.

  4. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  5. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  6. Click Save.

     
    Click to edit heading

    If you are adding multiple items, use drag and drop to re-order the items.

Adding Questions

 

  1. Double-click the Question on the canvas.

  2. Enter the required question.

  3. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  4. Click Save.

  5. Draw the links to the appropriate components and confirm whether 'Yes' or 'No'.

     
    Click to edit heading

    Ensure that both 'Yes' and 'No' links are set.

Adding Searches

 

  1. Double-click the Group that you wish to add the work items into.

  2. When the side panel opens click on the Search icon.

  3. Use the drop-down to select the required search.

  4. By default, the description is populated with the selected search, revise the description as needed.

  5. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  6. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  7. Click Save.

     
    Click to edit heading

    If you are adding multiple items, use drag and drop to re-order the items.

Adding Tasks

 

  1. Double click the Group that you wish to add the work items into.

  2. When the side panel opens click on the Task icon.

  3. Enter a description of the task.

  4. Set who the work item is to be assigned to and the number of days it should be scheduled for following the previous work item.

  5. Set if the work item is to be Mandatory.

     
    Click to edit heading

    If a work item is set as Mandatory it must be marked as Complete before any following work items can be actioned.

  6. Click Save.

     
    Click to edit heading

    If you are adding multiple items, use drag and drop to re-order the items.

How to Clone a Workflow

 

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

    A list of existing workflows will be displayed. 

  3. From the list of workflows click the three dots on the workflow that you wish to clone, and select Clone.

  4. Select the Matter Type you wish to clone the workflow too, and change the Description as required.

     
    Click to edit heading

    A warning will be displayed highlighting any items that do not have a match in the new Matter Type.

     
    Click to edit heading

    Critical Date and Matter Details items will be converted to Note items and highlighted within the relevant Group.

  5. Clicking Clone and Open will open the cloned workflow, it can then be edited as normal.

  6. Any Critical Dates or Matter Details Items that had no equivalent will have been changed to Note Items that will need to be edited.

  7. After making any changes click Save to update the workflow.

How to Delete and Undelete Workflows

 

To delete/undelete a workflow:

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

  3. From the list of workflows click the three dots on the required workflow and select Delete.

    Confirm you wish to delete the workflow.

  4. To Undelete a Workflow, click the Search option in order to filter to show Deleted workflows.

  5. Set the filter option to Deleted and click search.

  6. From the list of workflows click the three dots on the required workflow and select Undelete.

     
    Click to edit heading

    Workflows that are Deleted are not available to be attached to matters.

How to Edit a Workflow

 

To edit a workflow:

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

    The Workflow Builder screen will open. 

  3. From the list of workflows, you can either, double click the workflow you wish to update, or click the three dots on the required workflow and select Edit.

  4. To add or remove work items in a Group double click the relevant Group to open the side panel.

  5. Within the side panel click the work item that you wish to edit.

    Work Item 

    What the item does

    Precedent

    Create forms, precedents, and emails within the matter

    Precedents

    Create multiple forms and precedents within one easy click

    Dates

    Create critical dates within the matter 

    Searches

    Order InfoTrack searches

    Appointments

    Create appointments in your Outlook calendar and in the matter

    Tasks

    Create tasks in your Outlook calendar and in the matter

    Notes

    Allow for notes to be incorporated 

    Accounting

    Ability to add accounting functionality

    Matter Data

    Update Matter Data screens

     
    Click to edit heading

    If you are adding multiple items, use drag and drop to re-order the items.

  6. To remove items, hover the mouse over the appropriate item and you will see the delete icon appear. 

    Clicking this will remove the item.

  7. Once all the changes have been applied, click Save to close the side panel.

  8. To remove a Group or Question from the canvas, click on the required component and press delete.

  9. Click Save to save your workflow changes.

  10. Click Back to be returned to the workflow list.

How to Rename a Workflow

 

To rename a workflow:

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Workflow Builder icon in the top right corner to open the Workflow Builder screen.

    The Workflow Builder screen will open. 

  3. From the list of workflows click the three dots on the required workflow and select Rename.

  4. Amend the workflow description and click Save.

Matter Work Items

 

Here are the steps for attaching a workflow to a matter:

  1. When in your LEAP matter, you will see a Work Items button on the ribbon bar.

  2. Clicking this button will take you into the matter work items list.

  3. When clicking this button for the first time on a matter you will be prompted to attach a workflow.

  4. Click the drop-down > Select a Workflow....

 
Click to edit heading

If there is only one workflow enabled for the matter type, this will be selected by default. 

  1. Select the required workflow from the list displayed.

 
Click to edit heading

Only workflows based on the matter type will be listed for attaching.

  1. Click Attach to confirm the selected workflow.

  2. Once attached, each work item will be allocated a due date based on the date opened or the previous work item, and the number of due days assigned.

 
Click to edit heading

If the workflow contains a question, only work items up to this question will be assigned.

  1. The group to show the Work Items within. These can then be actioned as required.

 
Click to edit heading

Hovering over the coloured circles will show the current status of an item, and if In Progress/Completed the date it was actioned along with the name of the person who actioned the item.

Actioning Accounting Items

 

  1. When in your LEAP matter, you will see a Work Items button on the ribbon bar.

  2. Within the work item list locate the accounting item to be processed.

  3. Click the three dots in line with the accounting item and select the Create option:

    • Create Office Payment
    • Create Trust Payment
    • Create Time Entry

  4. The relevant accounting form will open for you to complete as required.

    Office Payment

    Trust Payment

    Time Entry 

  5. Once you have processed the accounts item, return to the work items list and update the status.

  6. Use the three dots in line with the accounting item and select Complete.

  7. The line will update to show a status of Done.

 
Click to edit heading

You can change the status of an item at any time using the three dots.

Working with Appointments

 

  1. Use the Work Items button on the matter to open the work items list.

  2. Within the work items list locate the appointment that you wish to update or complete.

  3. Click the three dots in line with the appointment and select Create Appointment.

  4. The Outlook appointment window will open for you to set the appointment details.

  5. Once the appointment has been confirmed, return to the work item and update the status.

 
Click to edit heading

The appointment will be added to the Calendar & Tasks tab on the matter.

  1. Click the three dots in line with the appointment and select Complete.

  2. Setting the appointment to a status of complete will update the work item.

 
Click to edit heading

You can change the status of an item at anytime using the three dots.

Working with Dates

 

  1. Use the Work Items button on the matter to open work items list

  2. Within the work items list locate the date that you wish to update or complete.

  3. Click the three dots in line with the date and select Update Date.

  4. Select the required date and click Update.

 
Click to edit heading

The date will be updated within the Calendar & Tasks tab on the matter.

  1. You will be prompted to Update Due Dates, these are Due Dates that are linked to the date that is being updated.

  2. Use the three dots to change the status to Complete.

 
Click to edit heading
  • Setting the status to Complete will set the date as completed within the Calendar & Tasks tab on the matter. 
  • Changing the date of a Critical Date will tick the box within the Calendar & Tasks tab on the matter if the date is changed to a date prior to or to the current date.

Detach a Workflow

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list, click the detach workflow icon.

  3. You will be advised that all items will be deleted and you will need to confirm if you wish to proceed.

 
Click to edit heading

All work items associated with the workflow will be deleted. Started and Completed items will still be available within the LEAP matter.

  1. You will be prompted to select a new workflow to attach.

Working with Documents/Emails

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list, locate the document that you wish to generate.

  3. Click the three dots in line with the document and select Create Document / Create Email / Open Link.

  4. The selected document/email will open in the relevant application.

  5. Once the document/email has been reviewed and is complete return to the work item list and update the status.

  6. Click the three dots in line with the document and select Complete.

  7. The work item will update to show it has been completed.

 
Click to edit heading
  • If a work item has been set as Mandatory this must be In Progress or Complete before any following work items can be actioned.
  • You can change the status of an item at any time using the three dots.

Working with Notes

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list, locate the note you wish to action.

  3. Click the three dots in line with the item and select Start or Complete accordingly.

  4. The work item will update to show a status of Complete.

 
Click to edit heading

You can change the status of an item at any time using the three dots.

Working with Questions

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list, locate the question that you wish to action.

  3. Click the three dots on the work item and select Answer.

  4. Confirm the answer to the question.

  5. Work items and questions that are associated with the selected answer will automatically be imported into the work items list. 

 
Click to edit heading

Once the status of a question has been answered, it cannot be changed.

Reassign a Work Item

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list, click the three dots icon in line with the work item that you wish to reassign to another staff member.

  3. Select Reassign.

  4. Use the drop-down to select the staff member that you wish to reallocate the work item to and click Reassign.

  5. You will be prompted to confirm the reassignation.

 
Click to edit heading

Upon confirmation, the work item will be reassigned.

Order a Search

 

  1. Use the Work Items button on the matter to open work items list.

  2.  Within the work item list, locate the search to be ordered.

  3. Click the three dots in line with the search and select Order Search.

  4. InfoTrack will open for the required search to be ordered.

  5. Once you have ordered the search, return to the work items list and update the status.

  6. Use the three dots in line with the search and select Complete.

 
Click to edit heading

You can change the status of an item at any time using the three dots.

Working with Tasks

 

  1. Use the Work Items button on the matter to open work items list.

  2. Within the work items list locate the task that you wish to update or complete.

  3. Click the three dots in line with the task and select Create Task.

  4. The Outlook task window will open for you to set the task details.

  5. Once the task has been confirmed, return to the work item and update the status.

 
Click to edit heading

The task will be added within the Calendar & Tasks tab on the matter.

  1. Click the three dots in line with the task and select Complete.

  2. Setting the task to a status of complete will update the work item.

 
Click to edit heading

You can change the status of an item at any time using the three dots.

Updating Due Dates

 

  1. Use the Work Items button on the matter to open the work items list.

  2. Within the work items list locate the item that you wish to update or complete.

  3. Click the date icon next to the date.

  4. Select the required date.

 
Click to edit heading

Use the drop-down next to the month/year if it needs to be changed.

  1. Click Update.

  2. You will be prompted if you wish to Update the due date for all subsequent items? Confirm as required.

 
Click to edit heading

Due dates will not be updated on items that have a status of Complete or Skipped.

Viewing Workflow Plan

 

It is possible to view the Workflow Plan from the Matter Workflow screen, this will show how the workflow is linked together.

The plan view can be moved around by clicking and dragging, it can also be zoomed in and out with the Crtl key.

 
Click to edit heading

Clicking the list icon will return to the Workflow items list. 

My Work Items

 

Using My Work Items will allow you to action work items across many matters from one simple location.

Here are the steps for working with My Work Items:

  1. Click LEAP Menu > Other and select Workflow.

    By default, work items that are assigned to you across all matters for the coming month will be displayed.

  2. Work Items displayed by default are those that require immediate action, these are 'Overdue, and Due Today'.

    Colour

    Status

    Red

    Overdue

    Yellow

    In Progress

    Orange

    Due Today

    Blue

    Due Soon

    Dark Grey

    Due Later

    Green 

    Complete

    Grey

    Skipped

    Initials

    Staff Member

  3. You can action work items and change the status of an item at any time using the three dots.

  4. Hovering over the coloured progress marker will show the current status of an item, and if actioned the date it was actioned along with the name of the person who actioned the item.

Working with Accounting Items

 

  1. Within My Work Items locate the accounting item to be processed.

  2. Click the three dots in line with the accounting item and select the Create option:

    • Create Office/Expense Payment
    • Create Client/Trust Payment
    • Create Time Entry

  3. The accounting form will open for you to process as required: 

    • Office/Expense Payment
    • Client/Trust Payment
    • Time Entry

  4. Once you have processed the item click the three dots in line with the accounting item and select Complete.

  5. The work item status will be updated and depending on the search criteria that you are currently viewing this item may be removed from the list.

    Note : You can change the status of an item at anytime using the three dots.

Actioning Appointments

 

  1. Within My Work Items locate the appointment that you wish to update or complete.

  2. Click the three dots in line with the appointment and select Create Appointment.

  3. The Outlook appointment window will open for you to set the appointment details.

    Note: The appointment will be added within the Calendar & Tasks tab on the matter.

  4. Once the appointment has been confirmed return to the work item and update the status.

  5. Click the three dots in line with the appointment and select Complete.

  6. The work item status will be updated and depending on the search criteria that you are currently viewing this item may be removed from the list.

    Note : You can change the status of an item at anytime using the three dots.

Actioning Dates

 

  1. Within My Work Items locate the date that you wish to update or complete.

  2. Click the three dots in line with the date and select Update Date.

    Note: The date will be updated within the 'Calendar & Tasks' tab on the matter.

  3. You can use the three dots to mark the status as Complete or as Start.

     
    Click to edit heading

    Setting the date to a status of Complete will mark the date as completed within the Calendar & Tasks tab on the matter, and depending on the search criteria that you are currently viewing this item may be removed from the list.

Change a Due Date

 

  1. Click the date icon on the item that you wish to change the due date for.

  2. Revise the date as required.

  3. Confirm if you wish to update all subsequent dates.

  4. Depending on the revised date the item may be moved into one of the other sections.

     
    Click to edit heading
    • You can change the status of an item at anytime using the three dots.
    • Changing the date of a Critical Date will tick the box within the Calendar & Tasks tab on the matter if the date is changed to a date prior to or to the current date.

Actioning Documents/Emails

 

  1. Within My Work Items locate the document that you wish to generate.

  2. Click the three dots in line with the document and select Create Document / Create Email.

  3. The document/email will be opened in the appropriate application and auto-populate.

    Note: If the item contains multiple documents, these will not be opened by default. However, will be available within the correspondence list on the matter.

  4. Once the document/email has been reviewed and revised, set the status to Complete.

  5. The work item will be updated and, depending on the search criteria currently being viewed, this item may be removed from the list.

    Note: You can change the status of an item at any time using the three dots.

Working with Matter Detail Items

 

  1. Within My Work Items locate the data item to be processed.

  2. Click the three dots in line with the item and select the Add Details option.

  3. The data table will open for you to input data as required and confirm using OK.

  4. Once you have added the required data click the three dots in line with the data item and select Complete.

  5. The work item status will be updated and depending on the search criteria that you are currently viewing this item may be removed from the list.

    Note : You can change the status of an item at anytime using the three dots.

Working with Notes

 

  1. Within My Work Items locate the note that you wish to action.

  2. Click the three dots in line with the note and select either Complete or Start.

  3. The work item status will be updated and depending on the search criteria that you are currently viewing this item may be removed from the list.

    Note: You can change the status of an item at anytime using the three dots.

Actioning Questions

 

  1. Within  My Work Items locate the question to be actioned.

  2. Click the three dots and select Answer in line with the question.

  3. Confirm the question answer.

  4. Additional work items and questions that are associated with the selected answer will automatically be added into the work items list. 

    Note: Once a questions has been answered it cannot be changed.

Order a Search

 

  1. Within My Work Items locate the search to be ordered.

  2. Click the three dots in line with the search and select Order Search.

  3. InfoTrack will open for you to order the required search.

  4. Once you have ordered the search, return back to My Work Items and click the three dots in line with the search and select Complete.

  5. The work item status will be updated and, depending on the search criteria that you are currently viewing, this item may be removed from the list.

    Note : You can change the status of an item at anytime using the three dots.

Actioning Tasks

 

  1. Within My Work Items locate the task that you wish to create.

  2. Click the three dots in line with the task and select Create Task.

  3. The Outlook task window will open for you to set the task details.

  4. Once the task has been confirmed, return to the work item and update the status.

    Note: The task will be added within the Calendar & Tasks' tab on the matter.

  5. Click the three dots in line with the task and select Complete.

  6. The work item status will be updated and, depending on the search criteria that you are currently viewing, this item may be removed from the list.

    Note : You can change the status of an item at anytime using the three dots.

Working with Search Criteria

 

  1. Within My Work Items there is the ability to view items by 'Staff, Matter Type, Work Item Type, Status and Date Range'.

  2. Clicking the Magnifying glass in the top right-hand corner will open the Search Criteria panel.

  3. Use the drop-down options to expand the selection options.

  4. Select the appropriate 'Staff, Matter Type, Work Item Type, Status and Date Range'.

  5. With the criteria set, click the Search button and the relevant items will be displayed.

    Note:  You can change the status of an event at anytime using the three dots.

Work Item Reallocation

 

Using Work Item Reallocation will allow you to assign work items across many matters from one staff member to another.

To access the Work Item Reallocation:

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click on the Work Item Reallocation icon in the top right corner to open the Work Item Reallocation screen.

  3. Within Work Item Reallocation there is the ability to view items by 'Staff, Matter Type, and Date Range'.

  4. Clicking the Magnifying glass in the top right-hand corner to change the Search Criteria as required.

  5. With the relevant work items now displayed, you are ready to select which work items need to be reallocated.

  6. Click to Select/Deselect the required work items.

     
    Click to edit heading

    You can select/deselect ALL work items using the top tick box or click individually as required.

  7. Click the Reassign button.

  8. Use the drop-down to select the staff member that the work items will be reallocated to.

  9. On confirmation of the selected work items, these will be assigned to the selected staff member and removed from the current list.

Work Items Report

 

Using the Work Items Report will allow you to report on work items across many matters for multiple users.

To access the Work Items Report: 

  1. Click LEAP Menu > Other and select Workflow.

    A list of current Work Items will be displayed. 

  2. Click the Work Items Report icon to access the Work Items Report.

  3. By default, a blank report screen will be displayed.

  4.  Clicking on the Search Icon will display a selection of search options available to be selected.

    The options available are:

    Assigned To

    		Select from the list of staff, multiple staff can be selected. If left blank, all staff will be included.  This will select who the items have been assigned to.

    Actioned By

    		Select from the list of staff, multiple staff can be selected. If left blank, all staff will be included.  This will select who the items have been actioned by.

    Matter Type

    		Select from the list of different matter types; multiple types can be selected. If left blank, all matter types will be included.

    Status

    		Select from the list of work item statuses, multiple statuses can be selected. If left blank, allstatuses will be included.

    Grouped By

    		Groups the reported items by the selection. The available choices are: Assigned Staff, Completed Staff, Work Item Name, Matter Type, Status and Matter Reference.

    Date Range

    		This is the range for the work items reported on. By default, it is the previous week.

    The Actioned Between checkbox allows the report to be run for items that have been actioned between the dates selected.

  5. Clicking the Search button will generate the report, displaying it on screen.

  6. Once the report has been produced, it is possible to export it in either Excel or PDF format.  The user will be asked for a filename and location to save the exported file.

Milestones

 

Milestones is a feature that allows the user to see the state of the workflow visually.  Milestones can be set on a group at a point in the workflow and used as a marker to show how far through the whole workflow the user is at.

The milestone will appear on the Matter Work Items screen as a visual indicator at the top of the screen. As the workflow progresses the milestone indicators will change colour to indicate the current state of the group they are associated with.

Adding a Milestone

 

Milestones are added to a Group when creating the workflow.

When creating a group within the workflow it is possible to mark that group as a milestone within the whole workflow. It is possible to have up to 10 milestone points, and these should be placed at significant points within the workflow.

When adding a group, the user can select the Milestone and add the description for that point in the workflow.

Milestone Overview

 

Clicking on the Circle Iconwill show the Milestone Overview Screen, this screen will show the status of the workflows across the matters that have milestones within them. This can be useful to keep an eye on the progress of matters.

The screen shows the Matter, Workflow and Group Name, the progress through the milestones in the workflow, the date of the last action on the workflow, who is responsible for the matter, and the status of the current milestone.

The information displayed can be changed by clicking the Magnifying Glass and changing the options selected.

It is possible to change the Person Responsible, the Matter Type, the Workflow and how the report is grouped, by default Archived matters are excluded.

Last Modified Date
27/10/2025 12:10 pm
Title
Workflow App
URL Name
Workflow-App-NZ

Resolution
Loading
Workflow App